Table of Contents
Advertisement
Machine head 121
Fig. 44: Setting the position of the integrated adjusting disk relative to the arm shaft (2)
⑤
⑥
(5) - Toothed belt wheel
(6) - Hexagon screwdriver
3. Use a hexagon screwdriver (6) to loosen the screws of the toothed belt
wheel (5).
4. Use the locking peg to lock the toothed belt wheel in place at position A.
5. Insert a 5 mm pin into the hole (3) and allow it to engage in the groove (4).
6. Tighten the screws on the toothed belt wheel (6).
70
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Advertisement
Table of Contents
