Dürkopp Adler 806N-111-10 Service Instructions Manual page 22

1. Insert the cover into the guide hooks at the bottom.
2. Pull the cover upwards.
3. Insert the cover into the guide hooks at the top.
 The cover is locked in place by the springs on the guide hooks.
1. Insert the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Insert the cover into the guide hooks at the top.
4. Tighten the screw through the front middle hole using a hex key.
1. Pivot the stacker away from the machine.
2. Insert the cover from above.
3. Tighten the slotted screws at the outer left of the cover.
4. Tighten the hex screws at the outer right of the cover.
5. Attach the ground cable at the inner right.
6. Pivot the stacker towards the machine.
20
Front left cover (4)
Front right cover (7)
Stacker cover (8)
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Basic setting