Edge Folding Device; Outer Frame; Setting The Actuating Time Of The Outer Frame Switch - Dürkopp Adler 806N-111-10 Service Instructions Manual

Edge folding device

7

7.1 Outer frame

The outer frame supports following functional elements:
The fine adjustment of the individual functional elements will be explained
separately in the following.

7.1.1 Setting the actuating time of the outer frame switch

Fig. 86: Setting the actuating time of the outer frame switch
(1) - Switch S3
(2) - Switch S8
Before you can adjust the actuating time of the outer frame switch, you
need to remove the cover from the edge folding station ( p. 17).
Proper setting
The switches S3, S6 and S8 should be operated shortly before the end po-
sition of the outer frame.
To set the end position damping of the outer frame cylinder:
1. Watch the damping during the automatic sequence.
OR
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Edge folding device
• Inner frame
• Lateral slides
• Front slides
• Corner tucker
① ②
(3) - Switch S6
②
113