Resetting The Winder Wheel - Dürkopp Adler 806N-111-10 Service Instructions Manual

Machine head 121

5.6.4 Resetting the winder wheel

Fig. 54: Resetting the winder wheel
(1) - Winder wheel
The winder wheel must drive the winder as soon as the bobbin winder is
switched on.
To reset the winder wheel:
1. Use the handwheel to turn the machine head to the upper needle
2. Loosen the screws (2) (2x) on the winder wheel (1).
3. Displace the winder wheel (1) on the axle.
4. Tighten the screws (2) (2x).
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
WARNING
Risk of injury from moving parts!
Crushing.
Only set the winder with the sewing machine
switched off.
①
position.
②
o
(2) - Screw
79