Table of Contents
Advertisement
Service settings via software
If you accessed the user interface intended for technicians from user in-
terface 2, you will see the currently selected pocket. Here, you can modify
the seam pattern directly. When you exit DA-CAD, the machine will NOT
perform a reference run, but show the selected pocket instead.
A Help file has been stored on the computer that explains how to use DA-
CAD. You can access the help file by pressing the Help button in the bar
at the top. You can also download a DA-CAD training document from the
Internet (www.duerkopp-adler.com).
9.4.5 Copying files to the PC
The files to which the pocket seam programs have been saved can be
copied to the PC from the USB key or from the PC back to the USB key.
Information
Files with the same name will not be overwritten when moved. Instead,
they will be assigned a consecutive number.
The PC displays an error message if no USB key is connected. If a USB
key is connected, but no files are displayed, there may be an issue with
the directory structure on the USB key. The files must not be stored in a
subdirectory, as they will otherwise not be recognized by the PC.
To copy/move files:
1. Plug the USB key into the port on the screen.
2. Press the Copy files
button.
The following window opens:
Fig. 122: Copying files to the PC
①
②
(1) - Files on the PC
(2) - Files on the USB key
148
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Advertisement
Table of Contents
