Table of Contents
Advertisement
To clean the machine:
1. Shut down the operating terminal.
2. Switch off the main switch.
3. Do not close the compressed air shut-off valve because compressed
4. Blow off lint and thread remnants to the front or the side using the
Points that need to be cleaned particularly thoroughly:
5. Clean the oil pan with a cloth.
168
NOTICE
Property damage may occur!
Blowing remnants of fabric or thread under the covers can damage
or destroy the machine motors.
NEVER blow remnants of fabric or thread under the protective
covers, but rather forwards or to the side..
NOTICE
Property damage may occur!
If the throat plate is not lifted carefully the equipotential bonding
connected to the plate can be damaged or ripped off.
ALWAYS lift the throat plate carefully.
Pay attention to the equipotential bonding when lifting.
air for cleaning will then no longer be available.
compressed air gun.
• Sewing material support surface
• Bobbin area
• Hook and surrounding area
• Thread cutter
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Maintenance
Advertisement
Table of Contents
