Service settings via software
Lift/lower sewing head
You can lower and lift the sewing head to check the speed of the process
and adjust the process if necessary by regulating the throttle valves
( p. 99).
To lift/lower the sewing head:
1. Press the Lift/lower sewing head
The thread lever is moved to the upper position, and the sewing head
2. Press the Sewing head button again.
The thread lever remains at the upper position, and the sewing head
Thread lever position
This option allows you to check or, if necessary, correct the correct posi-
tion of the thread lever.
To check the position of the thread lever:
1. Press the Thread lever
The sewing motor will rotate as far as the light barrier will allow - ide-
2. Check the position of the thread lever.
3. If necessary, correct the position of the thread lever.
To correct the position of the thread lever:
Fig. 131: Thread lever position (1)
(1) - Handwheel
(2) - Forked light barrier
1. Switch off the machine.
2. Use the handwheel (1) to turn the thread lever to the top dead center.
The edge (3) of the 180° disk (4) will no longer be captured by the
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
is raised/lowered.
is lowered/raised.
ally, until the thread lever is at top dead center.
①
fork light barrier (2).
button.
button.
②
③
(3) - Edge
(4) - 180° disk
④
155