Dürkopp Adler 806N-111-10 Service Instructions Manual page 158

Fig. 132: Thread lever position (2)
(2) - Forked light barrier
(3) - Edge
3. Loosen the screws (5) on the 180° disk (4).
4. Turn the 180° disk (4) until the edge (3) of the 180° disk (4) is captured
Sewing motor test
The Sewing motor test is used to, for example, test the oil pump and the
concentricity of the motor.
To test the functionality of the sewing motor:
1. Press the Sewing motor test
 The following window appears:
Fig. 133: Checking and setting the sewing motor (2)
156
②
by the forked light barrier (2) (see figure above).
Service settings via software
③
(4) - 180° disk
(5) - Screws
button.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
⑤
④