Inserting/Changing The Bobbin - Dürkopp Adler 550-D800 Operating Instructions Manual

4.1.7 Inserting/changing the bobbin

Fig. 18: Inserting/changing the bobbin (1)
(1) - Supply groove
(2) - Bobbin number
32
WARNING
Risk of injury from moving, cutting and sharp
parts!
Crushing, cutting and punctures are possible.
Only insert or change the bobbin with the machine
switched off.
NOTICE
Property damage may occur!
Damage to the machine.
Insert the bobbin into the hook in such a way that the supply groove
is pointing down and the rotational direction for pulling off the thread
is counterclockwise.
Use compressed air to remove any sewing dust from the area
around the bobbin case and the light barrier every time you change
the bobbin.
②
①
③
(3) - Bobbin barcode
Operating Instructions 550-D800 - 01.0 - 05/2023
Operation