Fig. 140: Lubricating (806N-121) (1)
(1) - Oil reservoir 1
Fig. 141: Lubricating (806N-121) (2)
(1) - Oil reservoir 1
(2) - Oil reservoir 2
Oil reservoir 1 (1) supplies oil to the sewing machine head. Oil flows from
oil reservoir 2 (2) to the hook oil reservoir via a wick connection.
Oil exceeding the MAX mark in oil reservoir 2 (2) is fed back into oil reser-
voir 1 (1) by a pump.
Checking the oil level
To check the oil level:
1. Check the oil level at oil reservoir 1 (1).
The oil level must be between the MIN marking and the MAX marking.
2. If the oil level is below the MIN marking, check the oil level at oil
Do not top up oil if the oil level in oil reservoir 2 (2) is above the MAX
3. If the oil level in oil reservoir 2 (2) is at the MIN marking, you will have
170
①
③
①
reservoir 2 (2).
marking. Instead, perform 20 sewing cycles before checking the oil
level again.
to top up the oil.
(2) - Oil reservoir 2
②
(3) - Oil filling neck
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Maintenance
②