Exiting The User Interface Intended For Technicians - Dürkopp Adler 806N-111-10 Service Instructions Manual

Service settings via software
2. Press the desired message to select it.
 The message is highlighted in blue. If a brief information text (2) has
3. To exit the screen, press the Exit
 You are returned to the User interface intended for technicians.

9.5 Exiting the user interface intended for technicians

To exit the user interface intended for technicians, press the Exit
button.
Information
To keep unauthorized persons from accessing the user interface intended
for technicians, close the program or shut down the PC. The user interface
intended for technicians will not be protected unless these steps have
been performed.
Exiting the program
To exit the program:
1. Press the Exit
 The touchscreen displays the Exit selection window:
Fig. 137: Exiting the user interface intended for technicians (1)
2. Press the Desktop
3. Enter password 25486.
 The operating software is closed.
 You are returned to the desktop of the computer.
4. Launch the operating software to work at the machine.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
been stored, the text will be shown at the top right next to the message.
button on the start screen.
button.
button.
165