7.5 Corner tucker
Fig. 99: Corner tucker (1)
(1) - Corner tucker
(2) - Lateral slide plate
(3) - Screw
Proper setting
The corner tucker (1) should place the fabric of the pocket blank under the
30° edge of the lateral slide plate (2). This ensures that the folded fabric
will not show in the area of the pocket opening.
126
WARNING
Risk of injury from moving parts!
Crushing.
Do not reach into the area of moving parts.
①
②
③
(4) - Spindle K
(5) - Spacer strip
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Edge folding device
⑤
④