Setting The Movement Of The Middle Slide - Dürkopp Adler 806N-111-10 Service Instructions Manual

7.3.4 Setting the movement of the middle slide

Fig. 96: Setting the movement of the middle slide
(1) - Throttle valve 1 (forwards)
(2) - Throttle valve 2 (down)
Proper setting
The middle slide should move swiftly and evenly forwards and backwards
as well as up and down. The proper setting can be observed best by mon-
itoring the forward movement during the folding process.
To set the Movement up and down:
1. Access User interface 2 and press the Work step by step
2. Press Push button 1 repeatedly until the middle slide lowers.
3. Press Push button 2 to raise the middle slide.
4. Watch the movement of the middle slide.
5. Turn the screws on throttle valve 4 (up) to set the speed.
6. Turn the screws on throttle valve 2 (down) to set the speed.
122
• To set a faster movement speed: Turn throttle valve 4 counterclock-
wise
• To set a slower movement speed: Turn throttle valve 4 clockwise
• To set a faster movement speed: Turn throttle valve 2 counterclock-
wise
• To set a slower movement speed: Turn throttle valve 2 clockwise
①
②
③
④
(3) - Throttle valve 3 (up)
(4) - Throttle valve 4 (backwards)
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Edge folding device
button.