Test Roll-Off Device - Dürkopp Adler 806N-111-10 Service Instructions Manual

Service settings via software
2. Press the buttons to enter a value between 100 and 3800 (806N-111) /
 The entered value appears in the input field above.
3. Press the Confirm
 The selection window closes, and the sewing motor operates at the
4. Press the Exit
 The entered value is deleted.
5. To exit the selection window, press the Exit
 The selection window closes, and you are returned to the Sewing
Sewing motor stop
To stop the sewing motor:
1. Press the Sewing motor stop
 The sewing motor stops and completes one cutting cycle.
Bartack (only 806N-111-10)
To check the sequence of movements while sewing a bartack:
1. Press the Bartack
 Zigzag is activated.

9.4.10 Test roll-off device

This option lets you test the operation and speed of the two outfeed rollers.
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
4000 (806N-121).
selected speed.
button to correct the entered value.
motor screen.
button to confirm the entered value.
button.
button.
button again.
157