Setting The Actuating Time Of The Middle Slide Switches - Dürkopp Adler 806N-111-10 Service Instructions Manual

Edge folding device
To set the Movement forwards and backwards:
1. Access User interface 1 and press the Slide automatically forward
 The middle slide moves forwards.
2. Press the Slider automatically forward
 The middle slide moves backwards.
3. Turn the screws on throttle valve 1 (forwards) to set the speed.

7.3.5 Setting the actuating time of the middle slide switches

Fig. 97: Setting the actuating time of the middle slide switches
(1) - Switch S11
(2) - Switch S10
Proper setting
The switches of the middle slide trigger signals at specific positions:
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
button.
• To set a faster movement speed: Turn throttle valve 1 counterclock-
wise
• To set a slower movement speed: Turn throttle valve 1 clockwise
Switch Actuating time/deactivation
S15 Switch activated when the middle slide is positioned before the rear end
position.
S12 Switch activated when the middle slide is positioned in the front position.
S11 Switch activated when the middle slide is positioned in the lower end
position.
S10 Switch activated when the middle slide is in the folding position, i.e. in the
position where the pocket is folded.
button again.
①
②
③
④
(3) - Switch S12
(4) - Switch S15
123