Table of Contents
Advertisement
Edge folding device
To set a switching point:
1. Move the piston into the detection range (2) of the proximity switch (1).
2. Press the capacitive user button (4) 3x to activate setup mode.
3. Press the capacitive user button (4) 1x to switch to the menu item
4. Press the capacitive user button (4) 1x.
The current piston position is taught as a switching point.
To set a switching point with a variable switching window width:
1. Move the piston into the detection range (2) of the proximity switch (1).
2. Press the capacitive user button (4) 3x to activate setup mode.
3. Press the capacitive user button (4) 1x to switch to the menu item
4. Press the capacitive user button (4) 1x.
The current piston position is taught as a switching point with a
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Switching point with variable switching window width.
Switching point with variable switching window width.
switching window width of approx. 2 mm.
Each additional press of the button increases the switching window
width by approx. 1 mm. (up to 15 mm).
131
Advertisement
Table of Contents
