6.2.2 Setting the lateral stacker position
Fig. 78: Setting the lateral stacker position
(1) - Clamping lever
(2) - Tray
Proper setting
To allow for effective stacking, set the position of the stacker as follows:
• For shirts with button stay: The button stay of the stacked workpiece
• For all other workpieces: The stacked workpiece should lie on the tray
To set the lateral stacker position:
1. Start the automatic sewing process.
2. Watch the position of the stacker and the stacked workpieces.
3. Loosen clamping levers (1) and (3).
4. Set the lateral stacker position.
5. Re-tighten clamping levers (1) and (3).
104
①
②
③
should be in the slot of the tray (2).
with its entire width.
(3) - Clamping lever
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Stacker