Table of Contents
Advertisement
Transfer carriage
2. When on the User interface intended for technicians, press the
The display shows the following submenu:
Fig. 108: Calibrating the positions (2)
Symbol
There is a number of recurring symbols that are shown on the display
during the various position calibrations. The following is a description of
these symbols:
Symbol
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Position calibration
Function
Position calibration for reading the coding
Position calibration relative to the upper sewing position
Position calibration relative to the lower sewing position
This position is merely a control position and, therefore, not included
on the sticker applied to the machine.
Position calibration relative to the edge folding station
Function
Lift and lower transfer plate
Lift and lower sewing head
Step width 0.1 mm
The transfer plate will be advanced by this value with each press of the
arrow buttons.
button.
135
Advertisement
Table of Contents
