Module Configuration; Hex ); Table 247: Analog Output Point Extended; Table 248: Analog Output Point Extended - WAGO -I/O-SYSTEM 750 XTR Manual

222 Fieldbus Communication
Instance 766 ... 1020 (Analog output value 766 up to 1020)

Table 247: Analog Output Point Extended 3 (74

Attribute ID Access
1
2
Common Services

Table 248: Analog Output Point Extended 3 (74

Service
code
0E
hex
10
hex

11.3.5.29 Module Configuration (80

Instance 0 (Class Attributes)

Table 249: Module Configuration (80

Attribute ID Access
1
2
Instance 1 ... 255 (Clamp 0 up to 254)

Table 250: Module Configuration (80

Attribute ID Access
1
Manual
Version 1.3.0
Name
Get AopObj_Value
Get AopObj_Value_
Length
Service available Service name
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate
No Yes Set_Attribute_Single
)
hex
) – Class
hex
Name
Get Revision
Get Max Instance
) – Instance 1...255
hex
Name
Get ModulDescription
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
) – Instance 766...1020
hex
Data type Description
ARRAY of Analog Output
BYTE
USINT Length of the output data
AopObj_Value (in byte)
) – Common service
hex
Description
attribute
Modifies an attribute value
Data type Description
UINT Revision of this object
UINT Max. number of instances
Data type Description
WORD Description of connected modules
(module 0 = coupler/controller)
Bit 0: Module has inputs
Bit 1: Module has outputs
Bit 8-14: Data width internally in
bit 15: 0/1 Analog/digital
module
For analog modules, bits 0-14
identify the module type, e.g., 401
for module 750-401
Default
value
-
-
Default
value
1 (0x0001)
-
Default
value
-