INVT Goodrive300 Series Operation Manual page 51

Goodrive300 Series VFD
Function
Name
code
Carrier
frequency
P00.14
setting
Detailed instruction of parameters
the reverse direction. FWD/REV indicator is on.
Modify the function code to shift the rotation
direction of the motor. This effect equals to the
shifting the rotation direction by adjusting either
two of the motor lines (U, V and W). The motor
rotation direction can be changed by QUICK/JOG
on the keypad. Refer to parameter P07.02.
Note: When the function parameter comes back
to the default value, the motor's running direction
will come back to the factory default state, too. In
some cases it should be used with caution after
commissioning if the change of rotation direction
is disabled.
2: Forbid to run in reverse direction: It can be
used in some special cases if the reverse running
is disabled.
Carrier
Electromagnetic
frequency
noise
High
1kHz
10kHz
Low
15kHz
Relationship between
frequencies
Model
1.5–11kW
380V 15–55kW
Above 75kW
4–11kW
500V 15–55kW
Above 75kW
660V 22–55kW
46
Noise and leakage
Heating
current eliminating
Low
High
models and carrier
The factory value
of carrier
frequency
8kHz
4kHz
2kHz
8kHz
4kHz
2kHz
4kHz
Function parameters
Default
Modify
value
Low
High
Depend
on
○
model