Fault Procedure - INVT Goodrive300 Series Operation Manual

Goodrive300 Series VFD
length is longer than or equal to the set length, the digital output terminal can output the length arrival
pulse signal of 200ms and the corresponding length will clear automatically.
(HDI high-speed pulse input function
0
1
P05.00
(HDI input type selection)
Note: The parameter of "Length arrival" is related to pulse output and the lasting time is 200ms.
Function
code
P05.00
HDI high-speed pulse
P05.49
P05.01– Digital input function
P05.09
P06.01– Digital output function
P06.04
P08.19
P08.20
P08.21
P08.22
P08.23
P08.24
P17.17
P17.22 HDI input frequency

7.19 Fault procedure

Goodrive300 series VFDs provide sufficient fault procedure information for the convenience of user's
application.
P05.49
selection)
Terminal function 32
0
Length reset
1
Length clear
2
P17.22
(HDI input frequency)
Name
HDI input selection
input function
selection
selection
selection
Set length
Actual length
Pulse per rotation
Alxe perimeter
Length ratio
Length correcting
coefficient
Length
Length value
P17.17
P08.20>P08.19 ?
P08.19 (set length)
P08.20 (actual length)
P08.20=P08.22 x P08.23 x P08.24 x f
Detailed instruction of parameters
0: High pulse input.
1: Digital input.
0: Frequency setting input
1: Counter input
2: Length counting input
32: Length reset
21: Length arrival
0–65535m
0–65535m
1–10000
0.01–100.00cm
0.001–10.000
0.001–1.000
0–65535
Display HDI input frequency
Range: 0.00–50.00kHz
185
Basic operation instruction
Digital output 21
Y
Length arrival
N
/P08.21
HDI
0.00kHz
0
Default
value
0
0
0
0
1
10.00
1.000
1.000
0