Figure 8-11 Adjusting Captive Screws Until The Torque Tool Gap Is 0.0 Inches (0.0 Mm.) - Sun Microsystems Sun Blade 1000 Service Manual

Torque tool B
FIGURE 8-11
8. Return torque tool B to its green plastic holder, then return the holder to its
storage location in the hard drive bracket.
9. If necessary install the cover for the shroud (see
8-16 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Adjusting Captive Screws Until the Torque Tool Gap Is 0.0 Inches (0.0 MM.)
(0.0 mm)
0.0 inches
FIGURE 8-12
)