FIGURE 3-7
3.3.1
Adjusting the Leveling Pads
If the cabinet will not be bracketed to the floor of the operating location you must
raise it off of its wheels to prevent movement.
1. Remove the leveling wrench from inside the cabinet.
2. Use the leveling wrench to lower the leveling pads at the four corners of the
cabinet so the cabinet cannot move, then adjust the leveling pads to make the
cabinet level.
3. Secure the leveling wrench inside the cabinet with the plastic strap.
14.81in.
(376.17 cm)
3.12 in.
(79.3 cm)
Sun Fire Cabinet Bracket Dimensions
40.00 in.
(1016.0 cm)
33.76 in.
(857.5 cm)
Chapter 3
Installing the Sun Fire Cabinet
3-7