Table C-11 Flash Prom Jumper Settings - Sun Microsystems Sun Blade 1000 Service Manual

FC-AL
connector
Audio card
Flash PROM Jumper Locations
FIGURE C-18
Flash PROM Jumper Settings
TABLE C-11
Jumper Pins 1 + 2 Select
J2103 Write-protect
J2104 Select
Note – Additional Flash PROM information for the Sun Blade 1000 and Sun Blade
2000 workstations can be found in the publication, Sun Flash PROM Guide for
Workstations and Workgroup Servers—Standalone Version (802-3233).
Sun
Default
Jumper on
Pins 2 +3 Select Pins
Write-enable 2 + 3
No select 2 + 3
Appendix C Functional Description
Flash
PROM
* jumpers
Signal Controlled
Flash PROM program
enable
X or Logic Set
C-49