I2C@1,30 Output Message; Network@5,1 Output Message; Parallel Port Output Message - Sun Microsystems Sun Blade 1000 Service Manual

4.9.11

i2c@1,30 Output Message

The following code example shows the i2c1,30 output message.
CODE EXAMPLE 4-18
obdiag> test 10
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/i2c@1,30
................................. passed
Hit any key to return to the main menu
4.9.12

network@5,1 Output Message

The following code example shows the network@5,1 output message.
CODE EXAMPLE 4-19
obdiag> test 11
Hit the spacebar to interrupt testing
Testing /pci@8,700000/network@5,1
..................................... passed
Hit any key to return to the main menu
4.9.13

Parallel Port Output Message

The following code example shows the parallel port output message.
CODE EXAMPLE 4-20
obdiag> test 12
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/parallel@1,300278
........................ passed
Hit any key to return to the main menu
I2c@1,30 Diagnostic Output Message
Network@5.1 Diagnostic Output Message
Chapter 4 Troubleshooting Procedures 4-21