Figure 8-3 Location Of Torque Tool A And Torque Tool B - Sun Microsystems Sun Blade 1000 Service Manual

2. Remove the access panel.
See Section 5.6, "Removing the Access Panel" on page 5-8.
3. Attach and antistatic wrist strap.
See Section 5.7, "Attaching the Antistatic Wrist Strap" on page 5-10.
4. Locate and remove torque tool A or torque tool B from its holder.
See .
FIGURE 8-3
Torque tool A
Location of Torque Tool A and Torque Tool B
FIGURE 8-3
Chapter 8 Removing and Replacing the Motherboard and Associated Components
Torque tool B
8-5