Table 1-1 Sun Blade 1000 And Sun Blade 2000 Product Features And Options - Sun Microsystems Sun Blade 1000 Service Manual

TABLE 1-1
2000 standard features and options.
TABLE 1-1
Processors
Processor cache
Memory
Audio interface
Expansion bus
Firewire
Graphics
Network
FC-AL
Parallel port
SCSI
1-2 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
is a product overview and summary of the Sun Blade 1000 and Sun Blade
Sun Blade 1000 and Sun Blade 2000 Product Features and Options
Sun Blade 1000
1 or 2 UltraSPARC III central
processing units (CPUs)
4 MB external cache for 600
MHz processors
8 MB external cache for 750
and 900 MHz processors
512 MB SDRAM (Min.)
8GB SDRAM (Max.)
60 ns
ECC error correction
8 DIMM slots
1-line in, 1-line out,
1-microphone in,
1-speaker out
4-Peripheral Component
Interconnect (PCI) slots;
3-64 bit @ 33 MHz,
1-64bit @ 64 MHz
2-IEEE 1394 serial port
connectors
2-UPA64S slots, providing
graphics support for the Sun
Creator 3D Series 3, Sun
Expert3D, Sun Elite 3D m3,
Sun Elite 3D m6, and Sun XV-
500 graphics cards
1-Ethernet/Fast Ethernet
10/100 Base-T Twisted Pair
Ethernet (TPE) connector
1-Fiber Channel-Arbitrated
Loop (FC-AL) copper
connector for mass storage
1-DB25 parallel port connector
1-Ultra-wide SCSI connector
Sun Blade 2000
1 or 2 UltraSPARC III Cu
central processing units
(CPUs)
8 MB external cache for
1015 and 1050 MHz
processors
512 MB SDRAM (Min.)
8GB SDRAM (Max.)
60 ns
ECC error correction
8 DIMM slots
1-line in, 1-line out,
1-microphone in,
1-speaker out
4-Peripheral Component
Interconnect (PCI) slots;
3-64 bit @ 33 MHz,
1-64bit @ 64 MHz
2-IEEE 1394 serial port
connectors
2-UPA64S slots, providing
graphics support for the
Sun Creator 3D Series 3,
Sun Expert3D, Sun Elite 3D
m3, Sun Elite 3D m6, and
Sun XV-500 graphics cards
1-Ethernet/Fast Ethernet
10/100 Base-T Twisted Pair
Ethernet (TPE) connector
1-Fiber Channel-Arbitrated
Loop (FC-AL) copper
connector for mass storage
1-DB25 parallel port
connector
1-Ultra-wide SCSI connector