Replacing The Speaker Assembly - Sun Microsystems Sun Blade 1000 Service Manual

Screw
FIGURE 6-15
6.7.2

Replacing the Speaker Assembly

Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Connect the combined cable assembly connectors to the speaker assembly
terminators (
2. Place the speaker tab into the chassis slot.
3. Using a No. 2 Phillips screwdriver, replace the screw securing the speaker
assembly to the chassis.
4. Detach the antistatic wrist strap, replace the access panel, and power on the
workstation.
See Chapter 9.
6-26 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Combined cable
assembly tabs
Removing and Replacing the Speaker Assembly
).
FIGURE 6-15