Replacing The Cpu Shroud; Figure 8-21 Removing And Replacing The Cpu Shroud - Sun Microsystems Sun Blade 1000 Service Manual

6. Using a No. 2 Phillips screwdriver, loosen the six captive screws securing the CPU
shroud to the motherboard.
7. Lift the CPU shroud from the motherboard (
Captive screws (6)
FIGURE 8-21
8.9.2

Replacing the CPU Shroud

Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Position and properly align the CPU shroud on the motherboard (
2. Using a No. 2 Phillips screwdriver, tighten the six captive screws securing the
CPU shroud to the motherboard.
Removing and Replacing the CPU Shroud
Chapter 8 Removing and Replacing the Motherboard and Associated Components
).
FIGURE 8-21
Cover for the CPU shroud
Tab (2)
CPU shroud
Motherboard
).
FIGURE 8-21
8-41