Activating The Workstation From Low-Power Mode; Figure 9-4 Sun Usb Type-6 Keyboard Power Key And Power Off Selection Dialog Box - Sun Microsystems Sun Blade 1000 Service Manual

Note – While in low-power mode, your system retains network-awareness, such
that it responds to tasks directed to it.
To enable power management:
1. Press the Sun Type-6 USB keyboard Power key (see
The system shutdown menu is displayed.
Note – The Sun Type-6 USB keyboard Power key cannot be used to power on the
workstation (as the Power key could be used on earlier versions of Sun keyboards).
2. Select Low Power from the Power Off Selection dialog box.
The system completes any in-process activities and then places all idle subsystems into
low-power mode.
Keyboard Power Key
Num Lock Caps Lock
Help Esc F1 F2 F3 F4 F5 F6 F7 F8
Stop Again ~ ! @ # $ % ^ & * (
` 1 2 3 4 5 6 7 8 9
Props Undo Tab Q W E R T Y U I O
Front Copy A S D F G H J K L
Caps Lock
Z X C V B N M <
Open Paste
Shift
,
Find Cut Control Alt
FIGURE 9-4
9.3.1 Activating the Workstation From Low-Power
Mode
To activate a system that is in low-power mode, click a mouse button or press any
key on your keyboard. The monitor display, if blank, refreshes, and the subsystems
return to full power as they are needed.
Note – By default, the hard drive is spun down when the system enters the low-
power mode. The drive can take as long as 30 seconds to spin back up.
9-6 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Scroll Lock Compose
F9 F10 F11 F12 Print Scroll Pause
Screen Lock
SysRq Break
) _ + Back Space Insert Home Page Num / * -
Up Lock
0 =
-
P { } | Del End Page 7 8 9 +
Down
[ ] Home PgUp
\
: " 4 5 6
Enter
;
'
> ?
Shift 1 2 3 Enter
. /
End PgDn
.
0
Com- Alt
pose Graph
Ins Del
Sun USB Type-6 Keyboard Power Key and Power Off Selection Dialog Box
).
FIGURE 9-4