Safety Precautions; Modification To Equipment; Placement Of A Sun Product; Power Cord Connection - Sun Microsystems Sun Blade 1000 Service Manual

5.3

Safety Precautions

Follow all safety precautions.
5.3.1

Modification to Equipment

Caution – Do not make mechanical or electrical modifications to the equipment.
Sun Microsystems is not responsible for regulatory compliance of a modified Sun
product.
5.3.2

Placement of a Sun Product

Caution – To ensure reliable operation of the Sun product and to protect it from
overheating, ensure that equipment openings are not blocked or covered. Never
place a Sun product near a radiator or hot air register.
5.3.3

Power Cord Connection

Caution – Not all power cords have the same current ratings. Household extension
cords do not have overload protection. Do not use household extension cords with a
Sun product.
Caution – The power switch on this product functions as a standby-type device
only. The power cord serves as the primary disconnect device for the workstation. Be
sure to connect the power cord into a grounded electrical receptacle that is near the
workstation and is readily accessible. Do not connect the power cord when the
power supply has been removed from the workstation chassis.
Chapter 5 Preparing for Component Removal and Replacement 5-3