Click
Torque Tool A Clicks When the Captive Screws Are Correctly Torqued
FIGURE 8-14
13. Return torque tool A to its storage location in the workstation.
14. If necessary, reinstall the filler panel for the shroud.
Caution – To ensure proper workstation cooling, any unused CPU slot must contain
a filler panel for the shroud (see
15. Detach the antistatic wrist strap, replace the access panel, plug in the power cord,
and power on the workstation.
Chapter 8 Removing and Replacing the Motherboard and Associated Components
Torque tool A
Captive screw(2)
).
FIGURE 8-4
8-19