6.10
Filler Panels
Use the following procedures to remove and replace a filler panel.
6.10.1
Removing a Filler Panel
1. Identify the filler panel to be removed.
2. Remove the peripheral bezel assembly (
3. Remove the plastic filler panel from the peripheral bezel assembly.
4. Remove the metal filler panel from the peripheral assembly (
Plastic
filler panel (4)
FIGURE 6-18
Removing and Replacing Plastic Filler Panels
Chapter 6 Removing and Replacing Major Subassemblies
).
FIGURE 6-18
Peripheral bezel
).
FIGURE 6-19
6-31