Replacing The Smart Card Reader Cable Assembly; Figure 6-9 Removing And Replacing The Smart Card Reader Cable Assembly - Sun Microsystems Sun Blade 1000 Service Manual
Hide thumbs
Also See for Sun Blade 1000:
- Manual (22 pages) ,
- Module installation manual (36 pages) ,
- Cpu module installation instructions (36 pages)
Table of Contents
Advertisement
FIGURE 6-9
6.3.8
Replacing the Smart Card Reader Cable Assembly
1. Position the smart card reader cable assembly in the chassis (
2. Connect the smart card reader cable assembly to the smart card reader.
3. Connect the smart card reader cable assembly to the motherboard connector J3904.
4. Detach the antistatic wrist strap, replace the access panel, and power on the
workstation.
See Chapter 9.
6-14
Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
To smart card reader
Removing and Replacing the Smart Card Reader Cable Assembly
To motherboard connector J3904
Cable route
).
FIGURE 6-9
Advertisement
Table of Contents
Troubleshooting
