FIGURE 6-14
6.6.2
Replacing the Fan Bracket
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Replace the fan assemblies (
See Section 6.5.2, "Replacing a Fan Assembly" on page 6-22.
2. Position the fan bracket and fans into the chassis by aligning the four lower tabs
and three upper side tabs.
3. Gently push the fan bracket down and toward the chassis frame until the fan
bracket side tabs latch.
4. Reconnect the fan power connectors.
See Section 6.5.2, "Replacing a Fan Assembly" on page 6-22.
6-24
Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Fan bracket
Removing and Replacing the Fan Bracket
FIGURE 6-14
1
).
2
Tabs