Test Alias Name, Device Path, -All Diagnostic - Sun Microsystems Sun Blade 1000 Service Manual

CODE EXAMPLE 4-5
ok probe-scsi-all
/pci@8,600000/scsi@4
LiD HA
3
1
/pci@8,700000/scsi@6,1
Target 0
Unit 0
/pci@8,700000/scsi@6
Target 6
Unit 0
M12011B08
ok
4.8.4

Test alias name, device path, -all Diagnostic

The test diagnostic, combined with a device alias or device path, enables a device
self-test program. If a device has no self-test program, the message
No selftest method for device name is displayed. To enable the self-test
program for a device, type the test command, followed by the device alias or
device path name.
The following code example identifies the test output message.
alias name selections, their descriptions, and their required preparation.
Note – The diskette drive is selected as the test alias name example.
CODE EXAMPLE 4-6
ok test floppy
Testing floppy
Probe-SCSI-All Output Message
--- Port WWN ---
3 210000203708ad4d
1 210000203700ca78
Disk SEAGATE ST39173W SUN9.0G2815
Removable Read Only device
Test Output Message
---- Disk description ----
SEAGATE ST39102FCSUN9.0G09299906F45038
SEAGATE ST39103FCSUN9.0G01479916021084
TOSHIBA DVD-ROM SD-
Chapter 4 Troubleshooting Procedures
lists test
TABLE 4-3
4-11