Diag-Level Variable Set To Min - Sun Microsystems Sun Blade 1000 Service Manual

CODE EXAMPLE 3-2
{0}Testing Branching on fcc1
{0}Verify branching
{0}Verify no branching
{0}Testing Branching on fcc2
{0}Verify branching
{0}Verify no branching
{0}Testing Branching on fcc3
{0}Verify branching
{0}Verify no branching
{0}* Ecache Functional
{0}Verify cacheline fill on read miss
{0}Verify write allocate on write miss
{0}Verify cacheline update on write hit
{0}Verify write back
{0}POST_END
3.4.2

diag-level Variable Set to min

When the diag-level variable is set to min, POST enables an abbreviated set of
diagnostic-level tests. See
code example identifies serial port A POST output with the diag-level NVRAM
variable set to min for 2-way, and single CPU configurations.
diag-level Variable Set to min (2-Way CPU)—
diag-level Variable Set to min (single CPU)
3-30 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
diag-level Variable Set to max (single CPU) (9 of 9)
for approximate completion times. The following
TABLE 3-1
CODE EXAMPLE 3-3
—
CODE EXAMPLE 3-4