Replacing The Combined Cable Assembly; Figure 6-10 Removing And Replacing The Combined Cable Assembly - Sun Microsystems Sun Blade 1000 Service Manual

To power switchk
FIGURE 6-10
6.3.10

Replacing the Combined Cable Assembly

Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Position the combined cable assembly in the chassis (
2. Connect the combined cable assembly as follows:
6-16 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
To interlock switch
LED
Removing and Replacing the Combined Cable Assembly
To motherboard connector J3602
To speaker
).
FIGURE 6-10