System Requirements For The Ultrasparc Iii 750 Mhz Cpu Module - Sun Microsystems Sun Blade 1000 Service Manual

Before installing the 600 MHz UltraSPARC III CPU module, verify that:
Solaris 8 10/00* is installed on your system. Solaris 8 10/00 is the first version of
software that supports the Sun Blade 1000, UltraSPARC III, 600 MHz CPU
module.
Software patches: 109888-10*, 110460-09*, and 108528-10* are installed on your
system.
OpenBoot PROM firmware v4.2.2 or later is installed on your system. This is
OpenBoot PROM firmware upgrade 111292-04. OpenBoot PROM firmware v4.2.2
is the first version of firmware that supports software patches 109888-10, 110460-
09, and 108528-10.
If necessary, upgrade your system's software and firmware to the versions described
above.
C.1.2.3 System Requirements for the UltraSPARC III 750 MHz CPU
Module
If you are replacing or installing a 750 MHz UltraSPARC III CPU module you need
to install software patches 109888-10*, 110460-09*, 108528-10*, and OpenBoot PROM
firmware upgrade patch 111292-04 or later.
The software patches and the OpenBoot PROM firmware upgrade patch can be
obtained from the Sun web site at:
http://www.sun.com/sunsolve/
Note – Always check the Sun web site for the latest compatible operating
environment, firmware, and software updates for your workstation.
Before installing the 750 MHz UltraSPARC III CPU module, verify that:
Solaris 8 10/00 is installed on your system. Solaris 8 10/00 is the first version of
software that supports the Sun Blade 1000, UltraSPARC III, 750 MHz CPU
module.
Software patches: 109888-10*, 110460-09*, and 108528-10* are installed on your
system.
OpenBoot PROM firmware v4.2.2 or later is installed on your system. This is
OpenBoot PROM firmware upgrade 111292-04. OpenBoot PROM firmware v4.2.2
is the first version of firmware that supports software patches 109888-10, 110460-
09, and 108528-10.
If necessary, upgrade your system's software and firmware to the versions described
above.
Appendix C Functional Description C-7