Installing The New Scsi Tray And Cd-Rom Drive; Removing The Scsi Tray; Figure 1-12 Cabling And Screws At Rear Of Scsi Tray - Sun Microsystems Sun Enterprise 5000 Upgrade Manual

Note – Insert boards component side down in the front of the system.
1.7 Installing the New SCSI Tray and
CD-ROM Drive
Note – Perform this procedure in the sequence specified.
1.7.1

Removing the SCSI Tray

1. Disconnect the power and data cable assemblies from the back of the SCSI tray.
2. Remove the two screws that attach the rear of the SCSI tray to the side bracket
.
SCSI tray
FIGURE 1-12
1-14 Sun Enterprise 5000 Centerplane Upgrade Guide • March 1999
Cabling and Screws at Rear of SCSI Tray