Enclosure; Enclosure Basics; Enclosure Features - Sun Microsystems Sun Blade 1000 Service Manual

C.5

Enclosure

The Sun Blade 1000 and Sun Blade 2000 enclosure allows for under-desk installation.
The enclosure design complies with all necessary environmental and regulatory
specifications.
C.5.1

Enclosure Basics

Overall dimensions of the enclosure are 10.0 inches x 24.4 inches x 17.8 inches
(255mm x 620 mm x 452 mm). The enclosure houses:
One 1.0-inch diskette drive or a second 1.6-inch device
One 1.6-inch DVD-ROM or tape drive
One 1.0-inch device slot for the smart card reader
Note – The DVD-ROM drive slot is used for an optional DVD-ROM drive or tape
drive.
Two 1-inch or 1.6-inch single-connector 3.5-inch hard drives
Two plug-in UltraSPARC III modules
Eight DIMMs
Four PCI slots
Two UPA64S modules
C.5.2

Enclosure Features

Enclosure features include:
Access for internal upgrades and service
Optimized system board layout
Graphics expansion module (UPA64S connector)
Processor placed on plug-in module expediting upgrades
All standard connectors and no splitter cables on rear panel
C-50 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002