Figure 8-20 Removing And Replacing The Motherboard - Sun Microsystems Sun Blade 1000 Service Manual

9. Lift the motherboard from the chassis and place it on an antistatic mat.
10. Remove the CPU shroud from the motherboard.
See Section 8.9.1, "Removing the CPU Shroud" on page 8-40.
11. Remove the DIMMs.
See Section 8.6.1, "Removing a DIMM" on page 8-30.
12. Remove the workstation ID SEEPROM.
See .
FIGURE C-15
Removing and Replacing the Motherboard
FIGURE 8-20
Chapter 8 Removing and Replacing the Motherboard and Associated Components
Cover for the CPU shoud
CPU shroud
Motherboard
Screw (3)
8-37