Firewire@5,2 Output Message; Flashprom@0,0 Output Message; Floppy Output Message - Sun Microsystems Sun Blade 1000 Service Manual

4.9.6

firewire@5,2 Output Message

The following code example shows the firewire output message.
CODE EXAMPLE 4-13
obdiag> test 05
Hit the spacebar to interrupt testing
Testing /pci@8,700000/firewire@5,2
.................................... passed
Hit any key to return to the main menu
4.9.7

flashprom@0,0 Output Message

The following code example shows the flashprom output message
CODE EXAMPLE 4-14
obdiag> test 06
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/flashprom@0,0
............................ passed
Hit any key to return to the main menu
4.9.8

Floppy Output Message

The floppy diagnostic verifies the diskette drive controller initialization. It also
validates the status of a selected disk drive and reads the diskette drive header.
The following code example shows the floppy output message.
CODE EXAMPLE 4-15
obdiag> test 07
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/floppy@1,3023f0
Firewire Output Message
Flashprom@0,0 Output Message
Floppy Diagnostic Output Message
Chapter 4 Troubleshooting Procedures 4-19