Stop-F Functionality; Stop-D Functionality - Sun Microsystems Sun Blade 1000 Service Manual
Hide thumbs
Also See for Sun Blade 1000:
- Manual (22 pages) ,
- Module installation manual (36 pages) ,
- Cpu module installation instructions (36 pages)
Table of Contents
Advertisement
10.2.3
Stop-F Functionality
Stop-F functionality is not available in workstations with USB keyboards.
10.2.4
Stop-D Functionality
The Stop-D (diags) key sequence is not supported on workstations with USB
keyboards. However, Stop-D functionality can be closely emulated by using the
power button double-tap (see Chapter 10.2.2). This action temporarily sets diag-
switch? to true. If you want the diagnostic mode turned on permanently, type:
ok setenv diag-switch? true
10-4
Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Advertisement
Table of Contents
Troubleshooting
