Figure 8-8 Removing The Plastic Cover From The Cpu Module Connectors - Sun Microsystems Sun Blade 1000 Service Manual

1. Remove the plastic cover from the CPU module connectors (see
Plastic top cover
Captive screw (2)
CPU module
Removing the Plastic Cover From the CPU Module Connectors
FIGURE 8-8
2. Lower the CPU module into the shroud until the CPU module's captive screws are
aligned with the threaded inserts (see
Chapter 8 Removing and Replacing the Motherboard and Associated Components
).
FIGURE 8-9
).
FIGURE 8-8
CPU module
connector (2)
Plastic cover
8-13