Safety Requirements; Safety Symbols - Sun Microsystems Sun Blade 1000 Service Manual

5.1

Safety Requirements

For your protection, observe the following safety precautions when setting up the
equipment:
Follow all cautions, warnings, and instructions marked on the equipment.
Ensure that the voltages and frequency rating of the power receptacle match the
electrical rating label on the equipment.
Never push objects of any kind through openings in the equipment. They may
touch dangerous voltage points or may short components, resulting in fire or
electric shock.
Refer the servicing of equipment to qualified personnel.
5.2

Safety Symbols

Note the following symbols and their meanings:
Caution – To avoid personal injury and equipment damage, follow the instructions.
Caution – Hazardous voltages are present. To reduce the risk of electric shock and
personal injury, follow the instructions.
Caution – Avoid contact. Surfaces are hot and may cause personal injury if touched.
5-2 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002