Preparing For Component Removal And Replacement - Sun Microsystems Sun Blade 1000 Service Manual

5
C H A P T E R
Preparing for Component Removal
and Replacement
This chapter describes how to prepare for removal and replacement of internal
workstation components.
Caution – To prevent equipment damage, review the safety requirements, safety
symbols, and safety precautions in this chapter before you remove or replace
workstation components.
This chapter contains the following topics:
Section 5.1, "Safety Requirements" on page 5-2
Section 5.2, "Safety Symbols" on page 5-2
Section 5.3, "Safety Precautions" on page 5-3
Section 5.4, "Tools Required" on page 5-5
Section 5.5, "Powering Off the Workstation" on page 5-5
Section 5.6, "Removing the Access Panel" on page 5-8
Section 5.7, "Attaching the Antistatic Wrist Strap" on page 5-10
5-1