Test Mode 510 - Riso ComColor IS900C Instruction Manual

Test mode 510 (Japanese characters)
From the firmware 5.12, the test mode 510 is available. You should use this test mode after replace the HDD.
According to this test mode, the machine will set up basic default setting depends on the model. Because brand-new
HDD is compatible with all ComColor models (included Japanese models). But setting of each model is slightly different.
If there are some Japanese character such as following photo on the panel, you should perform the test mode 510.
After re-booting, the screen will switch to English.
Attention!
After perform the test mode 510, All Admin setting and Test mode 7xx settings will be cleared.
So, please take care to use this test mode when it is not brand-new HDD
79
Japanese
Maintenance
Initialization