Test Print - Riso GOCCOPRO QS200 User Manual

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

Test Print

The image-making size used in Test Print is 200mm in the X direction and 420mm in the Y direction
regardless of the size of the set screen frame. Note that if you use a screen frame smaller than that
shown in the figure below, it may damage the thermal print head by contact with the screen frame.
● Test pattern 1
Three rows of repeated patterns of solid, 50%
dots, 25% dots, 12.5% dots, and checkered
START
80 mm
200 mm
Solid
50% dots
25% dots
12.5% dots
Checkered
Rear
Front
360 mm or more
● Test pattern 2
Grid pattern of 1-dot fine lines
｜69｜
3 Offline Mode
END