Tips For Better Paper Feeding; Storing Environment - Riso MZ970 User Manual

Note:
• Paper with a horizontal grain direction can cause problems with paper pass. Use paper with a vertical grain direc-
tion.
• Images are not output onto the entire area of usable print paper.
RISO does not assure that paper outside the above specifications pass through the machine and can be used for
printing.

Tips for Better Paper Feeding

To prevent paper jams and misfeeds, follow the directions below:
• When using standard or light-weight paper, set the Paper Feed Pressure Adjustment Lever to "
all four Paper Arrangers.
• When using thick paper (such as card stock), set the Paper Feed Pressure Adjustment Lever to "
the two inner Paper Arrangers.
• When using slippery paper, set the Paper Feed Pressure Adjustment Lever to "
• Slide the Feed Tray Paper Guides, Receiving Tray Paper Guides, and Paper Stopper to fit the paper size.
• Use flat printing paper that is free of folds. If curled paper is unavoidable, place the printing paper so that the curl
faces down.
• Paper may stick to the drum surface if the top margin is too narrow on the original or if the upper portion of the orig-
inal uses a large amount of ink. To solve this problem, lower the print position to provide a wider top margin or
reverse the top and bottom of the original. Then restart printing from the beginning.

Storing Environment

Store printing paper in a level, dry area. Storing the paper in an excessively humid area can result in paper jams or
poor print quality.
After unpacking printing paper, keep the remaining paper wrapped and store it in a moisture-proof box. It is highly rec-
ommended to put silica gel in the paper storage box.
p.33, p.35
p.33, p.35
Before Starting to Use
p.17
". p.33,
Paper Recommendations
". Then open
", and open
p.35
p.33
15